MTL4525 safety isolator Switch operated solenoid driver low power

Product overview

MTL4525 safety isolator Switch operated solenoid driver low power

              MTL4525  Switch operated solenoid driver low power  original product with good price

MTL4525 product specification as below for your reference.

MTL4525 safety isolator Switch operated solenoid driver low power

MTL4525 – MTL5525 SOLENOID/ALARM DRIVER switch operated with override, IIC, low power The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are certified as intrinsically safe or are classified as nonenergy storing simple apparatus. The MTL4525 allows a second safe-area switch or logic signal to be connected that enables the output to be disabled to permit, for example, a safety system to override a control signal.

MTL4525 safety isolator Switch operated solenoid driver low power

SPECIFICATION

See also common specification

Number of channels

One

Location of load

Zone 0, IIC, T4–6 hazardous area if suitably certified

Div.1, Group A, hazardous location

Minimum output voltage Equivalent output circuit

22.2

22.2 7.8

Hazardous-area output

Minimum output voltage: 7.8V at 48mA

Maximum output voltage: 24V from 300Ω

Maximum off-state output voltage: 4V from 300Ω

Current limit: 48mA minimum

Output ripple

< 0.5% of maximum output, peak-to-peak

Control input on MTL4525

Suitable for switch contacts, an open collector transistor or logic

drive

0 = input switch closed, transistor on or < 1.4V applied

1 = input switch open, transistor off or > 4.5V applied

Override input on MTL4525

An open collector transistor or a switch connected across the

terminals can be used to turn the output off whatever the state of

the control input

0 = transistor on or switch closed

1 = transistor off or switch open

Response time

Output within 10% of final value within 100ms

LED indicators

Green: power indication

Yellow: output status, on when output active

Maximum current consumption

100mA at 24V dc

Power dissipation within unit

1.3W with typical solenoid valve, output on

1.9W worst case

Safety description

Uo=25V Io=83.3mA Po=0.52W Um = 253V rms or dc

Other related models for MTL4500 range as below 

MTL4525 safety isolator Switch operated solenoid driver low power

MTL4501-SR       

MTL4504                

MTL4510              

MTL4510B                

MTL4511

MTL4513             

MTL4514D             

MTL4514_B          

MTL4516                   

MTL4516C

MTL4517             

MTL4521                

MTL4521L            

MTL4523                  

MTL4523L

MTL4523R           

MTL4523V-VL        

MTL4524              

MTL4524S                

MTL4525  

MTL4526             

MTL4541                

MTL4541A            

MTL4541AS              

MTL4541B

MTL4541P           

MTL4541S              

MTL4541T            

MTL4544                  

MTL4544A

MTL4544AS         

MTL4544B               

MTL4544D           

MTL4544S                 

MTL4546

MTL4546C           

MTL4546S              

MTL4546Y            

MTL4549                  

MTL4549C

MTL4549Y           

MTL4573                

MTL4575              

MTL4576-RTD           

MTL4576-THC

MTL4581             

MTL4582B              

MTL4531              

MTL4532                   

MTL4561

MTL4599             

MTL4599N

If you have any other question about MTL4525, please feel free to contact me here!

Contact details

HONGKONG XIEYUAN TECH CO., LIMITED

Telephone:86-

Mobile :86-(Whatapp&Wechat is available)

Skype:xyautomation

E-mail:sales1@hkxytech.com

Leave a message for product

Title

Contact

Tel

Content

Verify Code

Click to change

Note：1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!