IT-10 ion Tester be use Solid anion tester ,Static anion Tester
IT-10 be used to test the anion from such products as anion powder, tourmaline powder and various health products coatings.
IT-10 negative ion tester, Solid anion tester ,Static anion Tester
IT-10 ion tester for negative ion powder, silica gel, textiles, ceramics anion detection
I. Product features and appearance
IT-10 is a best measuring tool designed and developed by Shenzhen WanYi Technology Co., Ltd. and used to test the
anion from such products as anion powder, tourmaline powder and various health products coatings. The tester can test
the products of different traits including solids, liquids and powders. Based on American most advanced GM ion detection
technology, the tester can precisely detect concentration of anion from 0 to 106anions/cm3. There are various measurement
modes for option and its storage function may facilitate data view. It is the best auxiliary tool for research and development
institutions, anion health product chains, performance evaluation of textile health products, research, development and sales
of various anion products.
II. Test principle, purpose, innovation features and technical indexes of the product
1. Using instructions:
(1) Please never touch induction part,&nbs******bsp;else, the failure caused by touch on detection induction part is not included in
our guarantee scope.
(2) The anion generated from the nature is quite unstable and may cause different measurement results due to temperature,
humidity, ultraviolet, electromagnetic wave, radioactive rays and other factors of the testing fields.
(3) Please never place the tester in hot place&nbs******bsp;in the vehicle. The abnormal high temperature may result in internal circuit
damage to cause incorrect testing.
(4) Please never test in water. The tester is not set with any waterproof device. If it falls in water, please immediately pick it up,
remove battery and keep it dried in air. After complete dryness is confirmed, mount the battery in the tester for use. If there is
any abnormal phenomenon, please deliver the tester to the manufacturer for repair in charge.
(5) The tester used&nbs******bsp;placed in strong electric field&nbs******bsp;in strong magnetic field may result in failure so that this situation must
be avoided. The tester is not set with explosion-proof structure; thus, please never use it in the field where combustible gas may
leak.
(6) If the test result is within 60, this value may be environmental value. Please make more tests. Then if the test result is still
within 60, this value can be regarded as environmental background value.
2. Test principle of the product
IT-10 is based on the most advanced GM ray energy detection technology and used to measure weak energy of radioactive rays
from natural ores, ceramics, tourmaline, etc. Via long-term data experiment and accumulation, the energy of radioactive rays is
converted into anion quantity by up-to-date computer technology. The extremely accurate measurement can be achieved by this
method.
3. Purpose of the product:
(1) Research and discuss for ore anions conducted by research and development institutions.
(2) Application and detection of advanced functional materials and solid anion materials.
(3) Research and development test and performance evaluation for anion health product.
(4) Such test for various powder anions as content detection and evaluation for anions including natural ore, anion powder,
tourmaline and meteorite.
(5) Such test and evaluation for various solid anion products as research and development and detection for anion bracelet,
anion cushion, energy cup, Khan steam room, bedrock bath and paint coating, etc.
(6) Such test and evaluation for various liquid anion products as research and development and detection for nano-silver, anion
mask and anion facial cleanser, etc.
(7) Other relevant emerging industries.
5. Technical indexes of the product
|
Detector
|
High Performance GM Ion Detector
|
|
Measurement scope
|
0-99990 pieces/cm3
|
|
Measurement accuracy
|
<±15%
|
|
Measurement mode
|
Model 1, Rapid measurement mode
The detector measures for 10 seconds and then displays measurement value on LCD.
Model 2, Standard measurement mode
The detector measures for 20 seconds and then displays measurement value on LCD.
Model 3, Accurate measurement mode
The detector measures for 20 seconds for 8 times and then displays the average on LCD screen. It
is mainly used to test low concentration and unstable anion products to obtain more accurate data.
|
|
Large screen LCD
|
It adopts 4 digits LCD to display. If 9999 is exceeded, X10 magnification will display.
|
|
Data storage
|
It can store 28 recent test data. Date stored automatically can be viewed on the display and data
which exceeds 28 shall be overlain circularly.
|
|
Automatic shutdown function
|
Automatic shutdown functions of 15 minutes without operation to reduce energy consumption
|
|
Power supply
|
An universal 9V dry battery
|
|
Dimension
|
151X80X36mm
|
|
Weight
|
Approximately 0.35kg
|
|
Accessories
|
Portable sheath, Instructions and 9V battery
|
|
Service environment
|
-20°C-60°C, 5%-95%RH
|
|
Certification
|
CE (EMC1674)
|
Test cases of IT-10 solid anion tester:
Test photos of IT-10 used in solid tourmaline and anion powder(The following figure anion concentration:3186ions):
Test photos of IT-10 solid anion tester used to measure functional anion textiles, anion fabrics and anion clothes, etc.(The
following figure anion concentration:1496ions):
Test photos of IT-10 solid anion tester used to measure silica gel anion, anion bracelet and anion pendant, etc.(The
following figure anion concentration:1670ions and 1007ions):
IT-10 anion Tester X10 magnification view mode
(IT-10 will change automatically the measring range when the Measuring concentration is more than 10000,meanwhile
the display appears symbol of “X10", which means the displayed value needs to be expanded tenfold,As following figure
shown the anion concentration is 32010ions
IT-10 ion tester store data view mode
