Universal Centrifuges

Universal Centrifuges for sedimentation in swing-out-rotors or angle-rotors.Depending on the application, uncooled and cooled universal centrifuges are available.

Universal Centrifuges for sedimentation in swing-out-rotors or angle-rotors. Depending on the application, uncooled and cooled universal centrifuges are available. The benchtop centrifuges feature an imbalance switch and a brushless drive or induction drive motor, both nearly maintenance free. The soft-start and soft-stop-mode helps to avoid the mixing of the sediment.

Benchtop Centrifuge 2-16P 

• Up to 20,000 x g in angle rotors

• Magnetic rotor identification

• Brushless drive

• Low noise < 60 dBA

• Simple to operate

• Compact and robust design

• LCD display of run time, speed and RCF

Benchtop Centrifuge 3-16PK 

• Speed range up to 15,300 rpm

• Spincontrol Universal

• Various angle and swing-out-rotors available

• Maximum capacity of 4 x 250 ml

• Different adapters for micro centrifuge tubes up to 250 ml vessels available for the same bucket

• Maintenance-free induction drive motor

• Magnetic rotor identification prevents the rotor from overspeeding

• Stainless steel bowl

• Easy lid opening due to pneumatic spring support

• No need to open housing for emergency lid lock release

• window in the lid for external speed control

• Wearless electric fuse

• Imbalance switch

• Excess temperature cut-out for motor

• Possibility of pre-cooling the rotor during standstill

• Refrigerant CFC-free (R 134 a)

• Produced according to national and international safety regulations (e.g. IEC 1010)

Benchtop Centrifuge 3-18K 

• Speed range up to 18,000 rpm

• Spincontrol Comfort

• Backlit keys: start, stop, lid open

• Various angle and swing-out rotors available

• Maximum capacity of 4 x 250 ml

• Different adapters for micro centrifuge tubes up to 250 ml vessels available for the same bucket

• Maintenance-free induction drive motor

• Microcontroller controls speed, time and g-force

• Suitable for low speeds, e.g. for cell sedimentation, accuracy +/– 1 rpm

• Magnetic rotor identification prevents the rotor from overspeeding

• Motorized lid lock

• Easy lid opening due to pneumatic spring support

• No need to open housing for emergency lid lock release

• Window in the centrifuge lid for external speed control

• Stainless steel bowl

• Imbalance switch

• Possibility of pre-cooling the rotor during standstill

• Refrigerant CFC-free (R 134 a)

• Produced according to national and international safety regulations (e.g. IEC 1010)

Benchtop Centrifuge 3-30K 

• Speed range up to 64,000 x g

• Speed range between 100 rpm and 30,000 rpm selectable in steps of 1 rpm

• Spincontrol Comfort

• Maintenance-free brushless drive motor

• Free programming of all run parameters possible

• magnetic rotor identification prevents rotor from overspeeding

• Wide range of angle rotors from microliter tubes up to 85 ml capacity

• Swing-out rotor for a maximum capacity of 4 x 100 ml available

• Motorized lid lock

• Reliable drive system

• Efficient cooling from –20 °C to +40 °C

• Possibility of pre-cooling the rotor during standstill

• Refrigerant CFC-free (R 404a)

• Produced according to national and international safety regulations (e.g. IEC 1010)

Benchtop Centrifuge 4-16 

• Speed range up to 13,500 rpm

• Spincontrol Comfort

• Backlit keys: start, stop, lid open

• Various angle and swing-out rotors available

• Maximum capacity of 4 x 500 ml

• Different adapters for micro centrifuge tubes up to 500 ml vessels available for the same bucket

• Maintenance-free induction drive motor

• Microcontroller controls speed, time, temperature and g-force

• Two motorized lid locks

• Suitable for low speeds, e.g. for cell sedimentation, accuracy +/- 1 rpm

• Magnetic rotor identification prevents the rotor from overspeeding

• Easy lid opening due to pneumatic spring support

• No need to open housing for emergency lid lock release

• Window in the centrifuge lid for external speed control

• Stainless steel bowl

• Imbalance switch

• Produced according to national and international safety regulations (e.g. IEC 61010)