产品名称：CCS希希爱视 PD4-12024-2-E 数字电源

CCS希希爱视   PD4-12024-2-E    数字电源

外观尺寸	W 190 mm x D 95 mm x H 106 mm
适合光源(输出定额)	24V DC Light Units, total for all connectors: 120 W max. (ELR-02V: 120 W max. per connector, SMP-03V-BC: 60 W max. per connector)
通道数	2 channels
发光方式	Strobe lighting, continuous lighting (no overdrive)
驱动方式	Constant lighting
调光方式	PWM control
PWN频率	125 kHz
输入电压	100 to 240 VAC (+10% -10%)
频率	50/60 Hz
消耗功率	168 VA
输出电压	24VDC
输出电流	SM connector: 60 W / channel EL connector: 120 W / channel Channel Total: 120 W
涌入电流(typ)	14 A (at 100 VAC), 34 A (at 240 VAC) from a cold start *When selecting a circuit breaker, refer to this value and select the product that has the trip characteristics suitable for use with switched mode power supplies. For information on the applicable trip characteristics, refer to the switched mode power supply manufacturer websites, etc.
外部控制协议	Ethernet comm., PLCCOM comm.
错误检测显示	Panel surface Error lamp (red) and LCD screen display
错误检测输出	(1) Reflection to error status (Ethernet/USB) (2) UDP/IP packet transmission (single-shot/continuous transmission selectable) (Ethernet)
过电流保护	Operates at 109% or more of the output current (per channel) Recovery by power-on, panel setting knob, or error cancellation command via Ethernet/USB communication
过电压保护	Category II
输出端口	ELR-02V x 2, SMP-03V-BC x 2 SM/EL connectors on the same channel have the same intensity setting
外部控制端口	[Trigger input/output] Terminal block connector SL 3.50/10/180F 3.2SN OR BX (Weidmuller) 10 poles 1 to 4: input, 5: input common, 6 to 9: output, 10: output common [Ethernet] RJ-45 [USB] Mini-B
触发	Logic switching (High-Low switching), pin assignment change, filter time setting, emission delay time setting
适合规格	[Compatible standards] CE, UKCA [Environmental regulations] RoHS, TSCA PBT, REACH
使用温湿度	Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
保存温湿度	Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式	Natural air-cooling
重量	1.5 kg max.
材质,涂装,表面处理	Steel sheet, cover thickness: 1.6 mm, chassis thickness: 1.0 mm, black (leather satin)
附属品	Hardware manual x 1 Power Terminal Block Cover x 1 M4 screws for the cover x 2 AC Power Cable (2m-long 3-prong) with ground terminal*1 x 1 Trigger Terminal Block*2 x 1 *1 Model name of AC power cable: ACC-JIS-125-7-M4-2. AC power cable will not be included as an accessory for model names with "-NC". Please choose the NC model for the product without AC power cable. *2 Wires for trigger are not included. Please prepare them separately. Applicable power wires: AWG 26 to 16 (0.13 to 1.31 mm2), length: within 3 m, bare end: 8 mm (Ferrule can be used)
备注	Equipped with ON/OFF physical switch Supports keep-alive function
Program	【Sample Program】 Sample programs are available. See the 选件 tab.

微信/手机： 18938648240   QQ : 1605935956    电话 : 0755-83317774      Email : 1605935956@qq.com