flowmeter

Liquid-specific optional optional digital output of three diameters, cost-effective easy to install low-voltage drop is widely used in gas liquefaction system with temperature compensation

Range:
6mm Diameter: (0.001) 0.01 ~ 2L/min, (0.001 for the special option)
8mm diameter: 0.025 ~ 5L/min
10mm Diameter: 0.05 ~ 10L/min
Material:
Wetted parts: stainless steel
Other components: PPS, PA66, nickel-plated brass
Temperature range :0-70 ℃ (optional -20-100 ℃)
Pressure range: 10bar (optional more)
Pressure Loss: The maximum flow 0.3bar
Protection class: IP65
Weight: 200g
Power Supply: 24V ± 10%
Output :4-20mA; 0-10V; switching capacity
Display: A yellow LED lights (chosen when the switch output)
Flow regulator: VIA magnet

Supporting instrument

Applied to the liquid, the cumulative gas volume flow measurement and control
 Basic error of ± 0.2% F · S, 16 位 A / D converter, measurement and control cycle of 0.2 seconds
 Applied current, voltage, pulse output flow sensors or transmitters
 Instantaneous flow can choose by the hour or per minute as the unit of measurement
 Small-signal removal, prescribing, digital filtering, calibration function
 8 input signal line correction, effectively reduce the nonlinearity error of the sensor to broaden the measurement range of sensors
 Power failure logging can record the total power outage time, power outages and the last eight times the number of blackouts and power of real time.
Transferred out of view through the panel
 Single Display Type: Cumulative volume, instantaneous flow switch display, dual display type independent display
 2 points alarm output for instantaneous flow of the upper and lower amount of pre-alarm or cumulative output
 Accumulation of pulse output function
 Optional temperature and pressure compensation, the standard state of flux
 220V AC power supply or 24V DC, 12V DC power supply
 Transmitter output communication printing (option)
 Specifications Size: 160 × 80,96 × 96,96 × 48
 Other special requirements can be customized